Стабильная версия эмулятора 86Box обновилась до 6.0.

Changelog for final release
 User interface
 - Added translations to more emulator error messages
 - Fixed status bar icons for removable media remaining active after a load failure in some cases
 - Fixed hard disk image creation overwriting the file without confirmation if it already exists
 - Updated and cleaned up many translations

Machines    
 486
  - Fixed Samsung SPC-7500P BIOS crashing the emulator and not retaining CMOS settings
  - Fixed Samsung SPC-7500P incorrectly listing an internal video card
  
 586
  - Added on-board Yamaha YMF715 sound to the NEC Mate NX MA23C

 686
  - Removed Award v6.00PG BIOS option from the ECS P6BXT-A+ as it is not meant for this machine
  
Hardware
 Display
  - Fixed ATI Mach and S3 rendering glitches on specific drivers
  - Fixed black screens and other issues caused by invalid video memory configurations
  - Fixed incorrect refresh rates on Tseng ET4000AX cards
  
 Input
  - Fixed 104-key AT and PS/2 keyboard inaccuracies

 Sound
  - Fixed loss of MIDI input and output after changing devices while the machine is running
  
 Ports
  - Fixed ESC/P 2 printer not applying underlines correctly
  - Fixed text and PostScript printers corrupting non-ASCII character encodings
  - Fixed serial virtual console on Windows displaying extraneous messages when performing some emulator actions
  - Fixed serial virtual console on Konsole displaying a crash notification on exit
  - Fixed serial virtual console on macOS Terminal displaying an inaccurate folder in the title bar
  - Fixed serial virtual console on macOS Terminal not displaying session messages correctly on exit
  
 Storage
  - Added IDE CD-ROM drive model: MATSHITA CR-581-B
  - Fixed CD audio tracks on paths with special characters on Windows (again)
  - Fixed CD folder mounting crashing the emulator on some macOS hosts
  - Fixed CD folder mounting DOS file name conversion for dotfiles
  - Fixed CD folder mounting file timestamps older than 1970 or newer than 2037 (not displayed by all guest operating systems)
  - Fixed MDS/MDX image files remaining locked after a load failure
  - Fixed IDE hard disk inaccuracy when accessing sectors beyond the limit
  - Fixed IDE hard disk cylinder count, PIO and SDMA capability reporting inconsistencies
  - Fixed inaccuracies on IDE hard disk models: Seagate U8, Western Digital Expert 135BA

Выпущен русский перевод The Immortal (Sega Mega Drive / Genesis).
 
The Immortal (1990) от геймдизайнера Уилла Харви и Electronic Arts — культовая изометрическая RPG для Sega Genesis, известная своими тактическими боями, сложными головоломками и обилием текста.
 
Особенности локализации:

• Полностью переведены все 163 строки диалогов
• Отрисован кириллический шрифт для текста и титульного экрана
• Переведен интерфейс (кнопки ДА/НЕТ)
• Добавлена подпись автора на главном экране
• Размер ROM-файла увеличен с 1 МБ до 4 МБ

Патч предназначен для US-версии игры.
 
Автор перевода: DEsiN
Страница VK автора: https://vk.com/anton.desin
Запись стрима с прохождением игры от автора: https://www.youtube.com/live/l9Zt_6e3yIQ

Перевод игры и дополнительные материалы: https://disk.yandex.ru/d/2jgelTaDN7gCOw

Стабильная версия эмулятора 86Box обновилась до 6.0 Beta.

Changelog
Emulator
 - Added Windows ARM64 host system support
 - Added fast forward command to remove emulation speed limits
 - Added copy screenshot command for taking screenshots to the clipboard instead of saving to file
 - Added raw screenshot commands for taking screenshots without any scaling or shaders
 - Added button to reset the manager’s system directory
 - Added relative path conversion to disk images located two levels above the machine folder
 - Changed minimum macOS version to Mojave 10.14
 - Fixed AppImage crashing on startup on Wayland Linux hosts with the NVIDIA driver
 - Fixed Send Ctrl+Alt+Del and Ctrl+Alt+Esc buttons not working if the Keyboard requires capture option is enabled
 - Fixed emulated display resolution changes occasionally crashing the emulator (again)
 - Fixed manager system directory root showing up as a machine if a configuration file is present
 - Fixed manager machine count not updating when adding a new machine
 - Fixed manager not checking for invalid names when adding a new machine
 - Fixed manager update checker crashing during GitHub outages
 - Fixed empty machine folder being left behind when cancelling the configuration of a new machine
 - Fixed -?/--help command line option displaying a message box on non-Windows hosts
 
User interface
 - Reworked Settings and Preferences windows with tabs and pages respectively
 - Moved key bindings from the per-machine Settings window to the system-wide Preferences window
 - Moved monitor settings from the View menu to the Settings window’s Display page
 - Moved machine list search feature to the machine selector box
 - Added text search to all Settings window device lists
 - Added screenshot buttons to the toolbar
 - Added blue DVD icon to DVD-capable CD-ROM drives on the status bar
 - Added CD audio play and pause indicators to CD-ROM drives on the status bar
 - Added tape play and record indicators to cassette drives on the status bar
 - Added write protection indicator to the recently used image lists
 - Added decibel scale to the sound gain control
 - Added serial port driver name to the serial passthrough port selector on Windows and Linux hosts
 - Added translation: 🇬🇷 Greek by DimMan88
 - Improved manager performance when selecting machines
 - Improved ordering on Settings window machine and device lists (again)
 - Fixed emulation speed indicator disappearing on small window sizes
 - Fixed custom system fonts not being used by the interface on Windows hosts
 - Fixed mouse capture release indicator disappearing on macOS hosts
 - Fixed visual glitch when changing floppy drive types
 - Fixed keyboard navigation of settings pages containing tables
 - Changed Select media images from program working directory option to remember the last selected directory on subsequent prompts
 - Removed Toggle recompilation toolbar button due to its reduced importance
 - Updated translations: Chinese (Simplified), Chinese (Taiwan), Czech, Dutch, Finnish, French, German, Italian, Polish, Portuguese (Brazil), Portuguese (Portugal), Russian, Slovenian, Spanish (Spain), Turkish, Vietnamese

Machines
 Multiple categories
  - Renamed many machines to move their variant names to the machine list search feature

 808x
  - Added 8086 machine: IBM Multistation 5550
  - Fixed emulator crash during POST on the default IBM PC configuration
  - Fixed IBM PCjr keyboard freezes with some games
  - Changed Zenith Data Systems SupersPort on-board video to the Yamaha V6355D
  
 286
  - Added machine: Nixdorf 8810 M30
  - Added older Rev 0 BIOS option to the IBM PS/2 Model 30-286
  - Fixed incorrect memory detection on the IBM PS/2 Model 30-286
  - Fixed incorrect font on the Toshiba T3100e display
  
 386
  - Added 386SX machines: Philips P3345, Tandy 1000 RSX
  - Added ALi M6117 machines: ICOP-6021 (also known as Hand386 and Pocket 386), JUMPtec MOPS/386A
  - Fixed IBM PS/55 display glitches in Windows 3.x and OS/2
  - Renamed DataExpert SX495 to OPTI-495SX

 486
  - Added Socket 1 machines: Pioneer Vantage 4865C-25/33, Tandy Sensation!
  - Added Socket 2 machines: Intel Classic R/R Plus, Samsung SPC-7500P (known issue: broken in the beta release), Tandy Sensation! II
  - Added Socket 3 machine: ADD-X Normerel Xenon
  - Added PS/2 mouse support to the ECS Elite UM8810P-AIO
  - Added Award BIOS and more BIOS version options to the Acrosser AR-B1479
  - Added Micro Firmware BIOS variant option to the Packard Bell PB410A
  - Removed Cyrix CPUs from the DTK PKM-0038S and ECS AL486 due to BIOS incompatibilities
  - Removed Enhanced Am486, Am5x86 and Cyrix CPUs from the AIR 486PI due to BIOS incompatibilities
  - Fixed NVRAM error on the Lanner Electronics IAC-H488
  - Fixed emulator crash during POST on the Advantech PCM-9340
  - Changed minimum/maximum RAM and supported CPUs on many Socket 3 machines
  - Renamed ASUS PVI-486SP3C to PVI-486SP3
  - Renamed DataExpert SX495 to OPTI-495SX
  - Renamed DEC DECpc LPV to LPV+
  - Renamed FIC VIP-IO2 to 486-VIP-IO2
  - Renamed Zida Tomato 4DP to 4DPS
  
 586
  - Added Socket 5 machine: Compaq Presario 7100 Series 586
  - Added Socket 7 machines: ASUS TXP4-X, Lucky Star 5AVP3, MSI MS-5156, Siemens Simatic OP47
  - Added on-board Yamaha YMF701 sound and National Semiconductor LM78 hardware monitor to the Micronics Thunderbolt
  - Removed IDT WinChip CPUs from the HP Pavilion 73xx/74xx due to BIOS incompatibilities
  - Removed Cyrix CPUs from the NEC Mate NX MA23C due to BIOS incompatibilities
  - Fixed incorrect memory detection on the AST Bravo MS P/90
  - Changed minimum CPU support on the Siemens-Nixdorf D943
  - Changed default AST Bravo MS P/90 BIOS to the newer 2.02 version
  - Renamed AST Bravo MS P/90 to MS/MS-T/MS-L
  - Renamed ASUS TX97-XV to HP Pavilion 81xx

 686
  - Added Slot 1 machines: AIR P6KDI, FIC KN-6000, HP Brio 83xx, MSI MS-6117, TriGem Como
  - Added newer BIOS version option to the ECS P6BXT-A+
  - Added older BIOS version option to the Gigabyte GA-686BX
  - Added newer beta BIOS version option to the MiTAC/Trigon 6110Zu
  - Changed default ECS P6BXT-A+ and MiTAC/Trigon 6110Zu BIOS to the retail variants
  - Renamed PC Partner APAS3 to VIM863S and added on-board Sound Blaster ViBRA 16XV sound
  
Hardware
 Core
  - Improved CPU performance on ARM hosts (again)
  - Improved emulation accuracy of NEC V20/V30 CPUs
  - Added option to force the faster 486 interpreter when emulating 286 and 386 CPUs
  - Fixed OS/2 1.x crashing on some machines due to an FPU error handling inaccuracy
  - Fixed IBM DOS J4.x crashing due to a debug register inaccuracy
  - Fixed unreasonably fast POST times on machines with Flash ROM
  - Fixed expanded (EMS) memory support on the ACC 2036 chipset
  - Fixed power management (APM) support on the ALi M1489, SiS 496, SiS 5581, STPC and UMC 8881 chipsets, as well as Cyrix CPUs
  - Fixed incorrect PCI IDs for STPC integrated devices

 Display
  - Improved the emulated video card list by merging cards based on the same video chipset
  - Improved emulation performance of Voodoo cards on ARM hosts
  - Improved emulation performance of S3 ViRGE and Trio3D/2X cards
  - Added actual name to internal devices on the video card selector
  - Added 256 KB video RAM option to the Cirrus Logic GD5402
  - Added and changed on-board video RAM options on many machines
  - Added gamma control support to the S3 Trio3D/2X
  - Fixed ATI Mach, IBM 8514/A and Video 7 VGA 1024i rendering glitches on specific drivers
  - Fixed Voodoo Banshee/3 emulator crashes on specific drivers
  - Fixed incorrect refresh rates on even more cards (it never ends)
  - Fixed Cirrus Logic rendering glitches on E-Ten
  - Fixed Tseng ET4000/W32 picture positioning with overscan enabled
  - Fixed card model names on several video cards
  - Fixed incorrect video BIOS on the VLB Cirrus Logic GD5434
  - Fixed S3 video card detection by some tools
  - Renamed BOCA Research 4610 video card to BRI4610 and changed it to the correct GD5422 controller
  
 Input
  - Fixed mouse wheel accuracy on Windows hosts with certain mice and touchpads
  - Fixed Ctrl+Num Lock key combination on Windows hosts
  - Fixed 3M MicroTouch not registering touches on macOS hosts
  - Fixed 3M MicroTouch baud rate configuration
  - Fixed incorrect key codes on some keyboard types

 Sound
  - Added Analog Devices AD1816, Aztech Sound Galaxy Pro 16 AZTPR16, Covox Sound Master, HP Multimedia Pro 16V-A, IBM Music Feature Card, MediaVision ThunderBoard, Pro Audio Spectrum and TexElec SAAYM (CMS/Game Blaster + Yamaha OPM) ISA sound cards
  - Added ESS0968 ID variant of the ESS ES688 ISA sound card
  - Added audio output device option
  - Added Nuked OPL2 Lite for more accuracy over the previous Nuked OPL3-based OPL2 emulation
  - Added on-board MIDI input/output support to the IBM PS/1 family
  - Added DSP version configuration to select Sound Blaster models
  - Added software game port disable support to Pro Audio Spectrum Plus and 16 cards
  - Added actual name to internal devices on the sound card selector
  - Changed ESS ES688, ES1688 and Pro Audio Spectrum Plus cards to the 16-bit ISA bus
  - Changed MIDI input/output device selection to no longer require a hard reset
  - Changed FluidSynth to fall back to the system soundfont if none is set on Windows
  - Fixed Crystal CS423x and Aztech Sound Galaxy detection errors with some drivers
  - Fixed Pro Audio Spectrum Plus and 16 playback issues with some drivers
  - Fixed Pro Audio Spectrum Plus and 16 low playback volumes
  - Fixed SoftSynth issues with some drivers on Yamaha cards
  - Fixed Windows 9x DOS compatibility issues on Yamaha cards
  - Fixed CD audio volume control on Aztech Sound Galaxy cards
  - Fixed MPU-401 losing MIDI output messages when reset
  
 Network
  - Added network switch for connecting emulated machines
  - Added SMC 83C170 PCI network card
  - Added actual name to internal devices on the network card selector
  - Moved DEC DE-435 and Microsoft Virtual PC network cards into a single DECchip 21140 entry with variant selection
  - Changed Novell NE2000 and Realtek RTL8019AS network cards to the 8-bit ISA bus
  - Fixed DEC network cards losing connectivity during normal operation
  - Fixed DEC network cards not losing connectivity when disconnecting the cable
  - Fixed DEC network cards crashing the emulator on soft reboot
  - Fixed PLIP not reaching the network with some drivers
  - Fixed PLIP not working if the parallel port has no IRQ
  - Fixed PLIP packet loss on Linux
 
 Ports
  - Added parallel named pipe device emulating a LapLink, DirectParallel or basic bidirectional cable
  - Added FTL Sound Adapter, SiliconSoft SoundJr, OPL2LPT, OPL3LPT, CMSLPT and TNDLPT parallel port sound devices
  - Added serial device selector replacing the existing serial passthrough options
  - Added automatic client/server mode option to named pipe serial passthrough
  - Added Linux and macOS host support to named pipe serial passthrough
  - Added terminal emulator connection option to virtual console serial passthrough
  - Added partial Windows host support to virtual console serial passthrough for using a Command Prompt window as a terminal emulator
  - Added custom command option to virtual console serial passthrough on Linux and macOS hosts (defaults to creating a GNU Screen session)
  - Added parallel file device to log all transmitted data without the text printer’s page formatting
  - Added serial file device to log all transmitted data or receive data from an input file
  - Added serial and parallel port loopback plug devices for diagnostics software
  - Added printer language option to disable PDF conversion on the PostScript printer
  - Added printer language and paper size options to the ESC/P 2 printer
  - Added audio channel selection option to the Covox Speech Thing
  - Changed parallel port device selection to no longer require a hard reset
  - Fixed PostScript printer not saving output files in some cases
  - Fixed virtual console serial passthrough not displaying the pseudoterminal path in an easily-accessible location (now a message box)
  - Fixed host serial port passthrough not receiving data on some Linux hosts
  - Fixed ECP and EPP parallel port modes on machines with the VIA VT82C686A/B southbridge
  - Removed host serial port passthrough baud rate, data bits and stop bits options (the emulated port’s parameters are now automatically passed through to the host port)
  - Removed PLIP parallel port device as only the network card is required now (the parallel port to use is selectable through its Configure button)
  
 Storage
  - Improved CD folder mounting load times on Windows and macOS hosts (known issue: folders on macOS OpenZFS volumes may cause emulator crashes)
  - Added optional hard disk sounds
  - Added CD-ROM passthrough for real drives on Linux hosts
  - Added Daemon Tools MDS v2 and MDX CD-ROM image support
  - Added SCSI tape drive emulation
  - Added MFM/RLL hard disk models with speed emulation
  - Added physical hard disk support through manual configuration
  - Added physical floppy drive support for Linux hosts
  - Added QLogic ISP1xxx PCI SCSI controllers
  - Added standalone versions of several IDE controllers
  - Added jr-IDE PCjr IDE controller
  - Added IBM PS/2 ST-506 MCA hard disk controller
  - Added optional CD-ROM EDC/ECC error checking emulation
  - Added SCSI CD-ROM drive model: DEC RRD42
  - Added Panasonic/MKE CD-ROM drive models: MATSHITA CR-562 081k, MATSHITA CR-563 0.74 (replacing the previous 0.75 which is now a separate option)
  - Added IDE hard disk models: Quantum Fireball EL2.5AT, EL5.1AT, EL7.6AT, EL10.2AT, Western Digital Expert 200BA
  - Fixed hard disk write errors with VHD images on some hosts
  - Fixed Rock Ridge permission issues with CD folder mounting on Linux and macOS hosts
  - Fixed cue files encoded with BOM failing to load
  - Fixed CD audio playback on specific DOS games
  - Fixed CD audio tracks on paths with special characters on Windows
  - Fixed BIOS floppy drive errors after a soft reboot
  - Fixed Rancho RT1000B SCSI controller not working with specific versions of its DOS driver
  - Fixed AMD 53C974 and Tekram DC-390 SCSI controllers not working with specific Windows NT drivers
  - Fixed PS/2 ESDI, PS/2 SCSI and Adaptec AHA-154xC controllers not working on AIX
  - Fixed PS/1 XTA controller not reading disks on OS/2 1.x
  - Fixed incorrect GET CONFIGURATION reporting on non-DVD-capable ATAPI and SCSI CD-ROM drives
  - Fixed ATAPI hard disk detection issues
  - Fixed revision code on the MITSUMI CRMC-FX810T4 IDE CD-ROM drive model
  - Changed default IRQ to 7 on the Longshine LCS-6821N, Rancho RT1000B and Trantor T130B SCSI controllers
  - Renamed Panasonic/MKE CD-ROM controller to MKE/Panasonic
  - Renamed Acculogic XT IDE controller to sIDE-1/16
  - Renamed WD1003 AT controller to WD1003-WAH

Обновился эмулятор ZX Spectrum - Fuse.

- Add SDL 2 compatibility
- Make 2x the default display scaler so Fuse is more usable on modern screens
- Speed up display dirty-bit scanning for improved rendering performance
- Debugger: remove $-prefixed hex syntax to avoid clashes with variables, and fix missing bit numbers in DD/FD CB disassembly
- GTK UI: fix loading binary data from deleted files and avoid redraw seams in GTK3
- Unix: store the configuration file in the XDG configuration directory, while still reading ~/.fuserc as a fallback
- Win32 UI: if networking is blocked at startup, disable Spectranet with a warning instead of aborting
- Remove GTK2 support from the build and codebase
- Add and expand unit tests, including display rendering, dirty-region handling and disassembler regression coverage
- Various minor bugfixes and cleanups

Обновился эмулятор консоли PlayStation Portable - PPSSPP.

What's new in 1.20.4
- Ad-hoc
 - Support for "data.json" live status from adhoc relay servers
 - RetroAchievements UI improvements around subsets
 - Assorted ad-hoc UI improvements
 - Fixes for The Warriors and Street Riders in relay mode

- Texture upscaling
 - Fix old bug causing some textures to get stuck unscales on some hardware when using GPU texture upscaling
 - Improved performance of MMPX-adv upscaler
 - NNEDI3 and Spline36 GPU texture scaling
 
- Rendering fixes
 - Fix a bug in lens flare occlusion for the Syphon Filter games
 - Fix a bug in the software renderer
 
- Misc UI improvements
 - Instant type-to-search in game browser
 - Fix file picker problems on some Android devices (regression)
 - Fix crash in text edit fields on Mac/iOS
 - PSP DVD prototypes can now load directly
 - Cheat UI has been cleaned up and supports titles and comments natively
 - RetroAchievements subset display improvements
 - Basic deep link support on iOS
 - Soft keyboard has more symbols
 
- Other
 - Fix important (but mostly rare) crash bug affecting games that draw a lot
 - More plugin zip files can now auto-install
 - Pause on lost-focus on Linux
 - Frameskipping no longer breaks analog stick auto-rotation in GoW, however manual rotation still broken
 - Android: Restore "Landscape Auto", the "Auto" screen rotation mode now overrides the user rotation lock
 - Contribution by lrzlin: Loongarch improvements
 - Basic support for extracting ISO from 7zip files
 - Fix a bug that prevented loading certain texture packs
 - Fix music looping in Death JR
 - Hide the save-load indicator in the corner by default
 - Fix crash in the remote debugger, by Nemoumbra
 - Fix screenshot cropping bug
 - mfplat.dll is no longer required on Windows unless you need camera/microphone

Battletoads Returns: Triple Punch

Доступна полная версия игры.

От автора:
"И того в игре 14 эпизодов геймплея (локаций).
В последнем уровне, как и обещал, вас ждёт королевна-царевна тёмная, с потёртыми геймпадами и клавиатурами. Но чтобы её отбуцкать, до неё надо сначала дойти. Поэтому желаю приятной игры!

Возможно ещё будут обновления с исправлениями, если это потребуется.

Теперь об изменениях относительно предыдущих билдов:

• Исправлены баги
• Немного оптимизирована игровая логика
• Улучшены палитры некоторых уровней
• На экране с логотипом движка, добавлена возможность прослушать всю музыку из билда
• Новые уровни
• Наградные медали на экране с титрами, за прохождение при разных условиях, на разных сложностях"

Скачать