Life on Mars
Life on Earth
Secret of the Four Winds
Coloco DX
These are actually the same mapper type, which is Kai Magazine(or Kaiser Wave).
$3F0000 - $3FFFFF are self-programming area
$000000 - $00FFFF are CFI command area
They use 45 bytes of CFI query data as copy protection. Writing $98 to ($000055 << 1) enables CFI query, and writing $F0 to ($000000 << 1) disables CFI query.
If a different FLASH is used or if writing commands to FLASH CFI is disabled, a warning will appear during boot.Of course, there is a method to bypass this mechanism by providing a set of fake CFI query data to deceive the protection.As for reading/saving data to $3Fxxxx, there is also a method to map it to SRAM, ignoring CFI write commands in this address space. Since CFI commands are in the $3F0XXX address range and the saved data is in the $3FFXXX address range, mapping $3FXXXX directly to SRAM without any processing is perfectly fine.
Было бы здорово сделать модификации для Secret of the Four Winds и Coloco DX, поскольку в них нельзя играть на оригинальной консоли.
Эти игры можно запустить только на ядре, запрограммированном Stargazer.
It would be great to make the modifications for Secret of the Four Winds and Coloco DX, since they can't be played on the original console.
These games can only be played with the core programmed by stargazer.
