The x86 emulator has been updated - MartyPC.

This update brings a massive list of new features, so here's a quick summary:
 - New sound system and sound devices including Adlib, Disney Sound Source, and SN76489 3-voice sound
 - New floppy disk image library enabling a ton of new floppy disk image types and support for several copy protections
 - New frontend supporting both native and WASM, support for native file dialogs
 - ATA device emulation, supported by XT-IDE and jr-IDE devices for larger hard disk support
 - VGA support and improved PCjr and TGA video emulation
 - Memory and register editing

New eframe Frontend
- Some dependency API changes prompted me to switch window frameworks. The active Desktop frontend for MartyPC is now based on a customized fork of eframe

Native File Dialogs
- The RFD crate provides access to native file dialogs for your particular OS, including File Open and Save dialogs
- Startup errors are now reported via a system MessageBox. You should no longer have to rely on the command line output to tell why MartyPC didn't start

New Devices
- VGA
 - The IBM VGA card is emulated at last. MartyPC's VGA is based off its EGA implementation, with appropriate changes and additions. Clocked up to 28Mhz, the VGA is an expensive device to run at a character-clock accurate rate, so you may need a fast computer. Mode 13h and ModeX/Y are supported (Wolfenstein 3D's 'ModeY' works!)
 - The Video Card debugger window will show you the VGA's register state, including the current palette in realtime
 
- XTIDE Hard Disk Controller
 - An XTIDE Rev 2 device can now be emulated. Since this BIOS is open-source, a machine configuration that includes hard drive support is now the default: ibm5160_xtide
 - If you want the 'authentic retro' experience, the IBM/Xebec controller is still available as ibm5160_hdd as usual
 - The VHD creator has been updated to support the wide selection of common hard drive geometries that the XTIDE can support. You'll need to be running a machine with the XTIDE configured to see them
 - It is now possible to take a VHD file from 86Box (assuming you created it as a 'fixed' VHD) and use it in MartyPC (and vice versa!)
 
- jr-IDE Hard Disk Controller
 - To go along with the XTIDE, you can now emulate the jr-IDE. This gives you LBA-enabled ATA hard disk support and 736k of conventional memory backfill for your PCjr
 
- Adlib Music Card
 - The first audio device in MartyPC besides the PC speaker is the Adlib Music Card. OPL2 emulation is provided by the highly-accurate nuked-opl3 library
 
- SN76489
 - The 3-voice sound chip found in the IBM PCjr and Tandy 1000 will be automatically installed on these machines
 
- Disney Sound Source
 - If you have a parallel adapter specified, you can attach a Disney Sound Source, and enjoy various squawky digitized sounds in games that support it (Mostly Disney titles, Wolf 3d, Prince of Persia, and a few others. See Mobygames for a list of supported titles)
 
- Memory Expansion Cards
 - Conventional memory expansion cards can now be specified, at any address and with any capacity. It is possible to have non-contiguous memory regions if you decide to do so, but caveat emptor
 - An overlay for the IBM PCjr called 'pcjr_memory_sidecar' will provide an extra 512k to bring your PCjr up to 640k
 
Bitstream-level Disk Image Emulation
 The inclusion of the fluxfox disk image library has greatly expanded MartyPC's floppy disk image support, and enabled support for several copy protection schemes.
 
- Disk Image Support
Fluxfox supports reading a wide array of disk image formats:
 - TD0 (TeleDisk)
 - IMD (ImageDisk)
 - PSI (PCE Sector Image)
 - TC (TransCopy Image)
 - PRI (PCE Bitstream Image)
 - MFM (HxC/MFM Bitstream Image)
 - HFE (v1) (HxC Bitstream Image)
 - 86f (86Box Disk Image)
 - MFI (Mame Floppy Image)
 - SCP (SuperCardPro Image)
 - RAW (Kryoflux stream file set)
 
Disk image loading is multithreaded so large disk images can be loaded without pausing the emulator.

- Bitstream Image Writing
 Fluxfox can write bitstream images to 86f and PRI formats.
 
- Disk Image Visualization
 fluxfox also enables a new Floppy Image info window, including a Disk View that shows a graphical visualization of the disk surface.

- Zip Floppy Mounting
 - Thanks to rust-fatfs, we can now dynamically build FAT12 images. This enables mounting ZIP archives as floppy images. Of course the contents must fit! By default, an image of the largest supported size for the applicable drive will be created. There are a few options as well to enable creation of bootable diskettes
  - See the Wiki for more information
  
Memory Visualizer
- Using the new Memory Visualizer window, you can now view the contents of memory graphically, interpreting raw bytes as rendered text mode, or 1,2,4 or 8bpp pixels. This is a good way to explore the contents of memory, and when investigating a running game one can find things like the game's back buffer as well as sprites loaded into memory

New Debugger Features
- A floppy controller debug window shows operational state and command logs
- A debug window for the SN76489 shows channel state with optional UV meters and oscilloscope displays
- The memory viewer will now resolve memory-mapped addresses, although what is shown in those regions is device-specific
- The memory viewer now supports memory editing
- The CPU state viewer now supports editing registers and flags when the CPU is paused
- The Disassembly viewer will now disassemble instructions in memory-mapped regions, such as PCjr cartridges
- Display interrupt numbers as hex in the IVT viewer
- Show both source and return address in the Call Stack

Frontend Bug Fixes / Improvements
- Mouse capture is even easier, with double-click to capture and middle-click to release implemented by default
- The new Sound menu has been improved with the ability to mute and adjust the volume of sound sources
- Toggle the display between the window background and a GUI widget window. Shaders are also available in windowed mode (With the wgpu backend)
- Apply a bezel overlay in windowed mode. This works best with a shader preset that applies curvature, and the 'accurate' aperture selected. This isn't really a shader effect, just a GUI trick
- Fixed an issue where MartyPC would receive keyboard events even though it didn't have keyboard focus
- Prevent the emulated machine from receiving keyboard events when paused
- Reset the keyboard on loss of window focus (prevents stuck keys)
- Revamped Input/Output menu allows control of peripherals:
 - Mouse sensitivity/speed is now adjustable via the Mouse menu
 - The Keyboard menu allows for resetting the keyboard (clearing any stuck keys)
 - Mouse capture mode can toggle between emulating Mouse or Light Pen
 - Game port joysticks can be mapped to host controllers
- Performance Viewer: Show stats for Audio sources
- File tree browser:
 - Refactored floppy media menu
 - Added support for creating new disk images, formatted or unformatted
 - Display directories before files
 - Display correct icons for different file types

Core Bug Fixes / Improvements
- Improvements to TGA/PCjr video emulation
 - Support for hi-res 2bpp mode
 - Palette lookups in 2bpp modes
 - Framerate fixes in low resolution (160x200) modes
 - Support for 256k TGA apertures (1000HX)
- Added 8086 subtype of 8088 CPU for 16-bit data bus support
- Improved accuracy of the Programmable Interrupt Timer (PIT)
- Reworked wait state calculations
- Improved DRAM refresh DMA emulation
 - Removed timer hack for Area 5150 end credits as DMA accuracy is now sufficient
 - Many tests in Acid88 now pass
- BUS/PPI: Improve PCjr keyboard handling
- PPI: Fixed memory bank DIP switch masks for memory configurations less than <64K
- Emulation speed improved overall by approximately 10%

Distribution Changes
- Added new definition for an alternate 64K PCjr ROM dump
- dded new definition for an alternate 32K BASIC C1.0 ROM
- Added new definitions for the IBM 5160
- Added XUB and jr-IDE BIOS images
- Added BOCHS VGA BIOS build for 8088

Dependency Updates
- Too many to list

Known Issues
- Multi-window support (and thereby multi-video-card support) is current unimplemented under eframe. I hope to return this feature in 0.4.1
- VGA is still a bit of a work in progress, and you may see display glitches in certain situations, especially if scrolling is involved. Please report any issues you encounter
- PCjr floppy disk support is incomplete (currently read only)