Обновится эмулятор Atari 2600 - Stella.

- Enhanced ROM launcher to allow multiple images per ROM
- Made heaps of additional images available for the ROM launcher
- Added searching by filename for ROM launcher images
- Added option to start random ROM
- Added automatically enabled phosphor modes
- Enhanced Game Properties dialog for multigame ROMs
- Added 2nd UI theme and hotkey for toggling UI theme
- Added bezel support (incl. Sinden Lightgun)
- Added optional type format detection based on colors used
- Added Joy2B+ controller support
- Added auto detection for QuadTari attached controllers
- Enhanced Kid Vid support to play tape audio
- Added port selection, used for controller default mapping
- Added missing PlusROM support for E7 bankswitching
- Enhanced movie cart (MVC) support
- Accelerated emulation up to ~15% (ARM)
- Added limited GameLine Master Module bankswitching support
- Added 03E0 bankswitching for Brazilian Parker Bros ROMs
- Added WF8 bankswitching used by some certain Coleco white carts
- Added JANE bankswitching used by Coleco's Tarzan prototype
- Added ELF mapper for Mattress Monkeys
- Added BUS bankswitching support for some older demos
- Fixed broken 7800 pause key support
- Added developer option for random hotspot peek values
- Added user defined CPU cycle timers to debugger
- Removed 'launcherroms' option, since it was causing some issues
- Codebase now uses C++20 features, which means a minimum of gcc-11 or clang-10 for Linux/Mac, and Visual Studio 2022 for Windows

Эмулятор Atari 2600 написан на языке Go.

Bug Fixes
- Rewinding of ELF binaries caused visual artefacts on screen
- Changes to screen rendering prevented the VideoChess bot from starting
 - Bug introduced in v0.31.0
- Added ELF to list of valid ROM extensions
 - A file with the .elf extension would not be shown by the ROM selector
- Mouse wheel events could crash the emulator
 - This affected MacOS builds on machines where mouse-wheel style scrolling is done with a touch-pad
- Replay button in tracker window could crash the emulator 

Changes
- TIA audio sampled every colour clock
 - This fixes problems with ROMs where the channel volume is update more than twice per scanline
- Added option to enable warning for "undefined symbols" when loading ELF ROMs
 - It is possible to compile an ELF binary with undefined symbols. Rather than reject the file when it is loaded, I have chosen to allow the ROM to execute and to continue until the symbol is referenced (which may never happen)
 - It is possible to compile an ELF binary with undefined symbols. Rather than reject the file when it is loaded, I have chosen to allow the ROM to execute and to continue until the symbol is referenced (which may never happen)
- Added CARTRIDGE SETBANK command
 - It wasn't possible previously to set the current bank of a cartridge. I had originally chosen to avoid the problem because of the high variety of ways a mapper might implement banking (if at all)
 - The options to the SETBANK command vary depending on the specific mapper but generally, a mapper will expect a numeric value
  - Segmented mappers can take multiple numeric values. Separate values with a colon
  - In some instances, segments can be mapped to cartridge RAM. add an 'R' after the segment number to indicate the use of RAM. For example, the 3e mapper allows very flexible mapping of RAM
     CARTRIDGE SETBANK 1R:2
  - Some segmented mappers only allow a predefined 'pattern' of segments. In these cases the numeric value to the SETBANK command will be a pattern number. The two mappers affected by this are Supercharger and Wickstead Design
  
Other Changes
- Added ELF support for REL32 and PREL31 relocation
- Improved DWARF support for typedefs
- Better decision making over whether variables are in global scope
- Prevent possibility of infinite recursion in DWARF builder

Обновился эмулятор MSX - openMSX.

Крупное обновление, в котором обновили графический интерфейс, заменяющий меню OSD. Более быстрый и мощный отладчик добавлен в openMSX.
Конфигурацич для MSX joystick/JoyMega была значительно улучшена с использованием нового интерфейса.
На данный момент для запуска openMSX требуется система с поддержкой OpenGL 2.

MSX device support:
- OPL4: fixed detail in YMF262 register mirroring
- turboR PCM:
 - fixed sample frequency to 15700Hz (not 15750Hz as found in some documentation)
 - implement sample buffer (bit 0 on port 0xA5) to improve sound quality
- flash ROMs: added a lot of accuracy to its emulation
- WD2793 and TC8566AF FDC's: fixed several details
- Konami mapper: added missing mirroring
- improvements on I8254 mode 3 used in some RS-232C interfaces
- added support for the concept 16-bit NEO mappers, which may be used by someone in the future. If this doesn't happen, support will be dropped again
- added support for the ASCII16-X mapper which will be used by some upcoming games
- fixed mapper of Mitsubishi ML-TS2 modem software
- added support for Circuit Designer RD dongle
- added new machines/extensions:
 - Hitachi MPF-310H
 - Hitachi MB-H70
 - USA version of Yamaha CX5M
 - National CF-SM003
 - German Spectravideo SVI-738
 - French Canon V-20
 - Yeno DPC-64
 - Hitachi MB-H21
 - Sony HB-T600
 - Others: Philips VU-0040, General Paxon PCT-55, Sanyo MPC-64, OPL3 Cartridge with Moonsound compatible port mapping
 
New or improved emulator features:
- removed SDL renderer
- added new GUI:
 - main menu bar with these menu items:
  - Machine
   - Select MSX machine
   - Firmware switch
   - Pause emulator
   - Reset MSX
   - Power on/off
   - Test MSX hardware (much faster than in Catapult)
  - Media
   - Cartridge slots with ROM cartridges or extensions
   - Disk drives
   - Tape deck
   - Hard disk
   - CD-ROM
   - Laserdisc
  - Connectors
   - joystick ports, printer ports, MIDI ports, etc
  - Save state
   - Load/Save state
   - Load/Save replay
   - Reverse/replay settings
  - Tools
   - Virtual keyboard
   - Copy/paste
   - Capture audio/video/screenshot
   - Disk Manipulator
   - Trainer
   - Cheat Finder
   - SCC viewer
   - Audio channel viewer
   - OSD Toys
  - Settings
   - Video
   - Sound
   - Speed
   - Input
    - Configure MSX joysticks
   - GUI
    - Configure GUI shortcuts
   - Misc
    - Configure OSD icons, show status bar
  - Debugger
   - Toolbar
   - Disassembly view
   - CPU registers
   - CPU flags
   - Slots
   - Stack
   - Breakpoints
   - Symbol Manager
   - Watch expressions
   - Bitmap viewer
   - Tile viewer
   - Sprite viewer
   - VDP register viewer
   - Palette
   - Hex editor
  - Help
   - Links to manuals
   - About
 - Reverse bar
 - OSD icons
 - Status bar
 - Console
 - Messages
 - Drag and drop
 - Shortcuts
 - Separate pop-out windows
 - Windows can be docked on other windows or in a tab widget
 - 3 styles: Dark (default), Light, Classic
 - configurable font and font size. Default: DejaVu
- OSD menu:
 - removed in favour of new GUI
- only warn once for unsupported size in Konami mappers
- suppress warning messages during reversing
- fully configurable MSX controller mapping for joysticks (msxjoystick1/2 pluggables) and JoyMega devices (joymega1/2 pluggables)
- low level debugger (scripting):
 - added support for symbol management
- allow to set a breakpoint (or any Tcl callback) when the VDP dot clock direction is written "wrongly"
- added VGM recording for OPL3
- added minimal support for unplugging and replugging host controllers
- added support for RS232Net: connect MSX RS-232C interfaces to the local network
- removed several OSD scripts which have been replaced by the GUI, sometimes almost 1 to 1: 
 - reverse bar
 - tile viewer
 - sprite viewer
 - palette editor
 - VDP register viewer
 - tabbed machine view
 - display_message
 - quit menu
 - OSD keyboard
 - load_icons
- removed support for savestates with .xml.gz extension
- do not save SRAM to file if unmodified
- added support to run openMSX fully in headless mode
- allow to specify the device name of IDE devices in their config XML file
- base the Boosted MSX2 EN on the Philips NMS 8245 instead of 8250
- fixed crash when multiple debug-devices were used at once
- fixed possible crash on specific combination of watchpoints and replay
- fixed possible crash on no longer supported savestates:
 - we try to keep old savestates working. Nevertheless occasionally we do remove stuff. Loading an old savestate which contains such stuff used to crash, now we give a clean error message
- fixes for load_settings command

Build system, packaging, documentation:
- added support for loongarch
- required GNU compiler is now at least g++-11
- required clang compiler is at least clang++-16
- required Visual Studio Compiler is at least 2022
- on macOS, at least Xcode 15.4 is required
- Android build is totally broken, and will require a lot of effort and help to get back up, which is not planned by us.
- 3rd party updates of SDL (2.30.1), SDL2_ttf (2.22.0), GLEW (2.2.0)
- added patch to add aarch64 support to libtheora 3rdparty build
- fixed link error in libvorbis for Xcode 15 on macOS
- avoid pkg-config build error with Clang 15 on macOS
- quite a large update of the manual (mostly to include the new GUI)

Новый эмулятор советского компьютера Вектор-06Ц.

Features:
- Cross-platform (Windows, Ubuntu (Debian family)) CMake x32 build
- Added the Screen Keyboard Window
- CLI loading file command support
- Remapped Restart to F12
- Refactored project structure
- The main loop, event handling, and the graphics context setup transferred from FLSW to SDL3/GLAD
- Native window loading/saving dialog windows replaced with a cross-platform solution
- Updated hints

Bug Fixes:
- Fixed key handling during HW running
- Fixed Piral game (avoided touching unused flags)
- Fixed an issue of not loading fonts at startup
- Fixed minor bugs (part of SDL/ImGui/loop refactor)
- Fixed small bugs in Windows build

Стабильная версия эмулятора 86Box обновилась до 4.2.1

Changelog
 Emulator
 - Fixed keyboard shortcuts for full screen mode when the Keyboard requires capture option is set

 Machines
 - Added video overscan delta option to the IBM PCjr (fixing the game on the screenshot above)  
 - Fixed some copy protected games on the IBM PCjr
 - Fixed CMOS password and other boot issues on the Radisys EPC-2102
 - Fixed PCI device IRQs on the A-Trend ATC6310BXII
 - Fixed on-board S3 ViRGE video on the Intel AP440FX
 - Fixed incorrect CPU speed reporting on the HP Vectra VL 5 Series 4
 - Fixed missing CPU selections on the DataExpert SX495
 - Fixed Genoa Unknown 486 extended memory support
 - Fixed Acer A1G hanging during POST with some CPUs 
 - Fixed Olivetti M19 display corruption in high resolution mode
 - Fixed IBM PCjr / Tandy 1000 family display corruption with some games
 - Fixed Tandy 1000 display corruption on soft reboot
 - Fixed IBM PCjr not rebooting on cartridge removal
 - Fixed IBM PCjr video type selection not working
 - Changed minimum RAM on the Tandy 1000 to 384 KB and on the Tandy 1000 HX to 256 KB
 - Changed Phoenix XT clone BIOS revision to a newer one
 - Renamed Tandy 1000 to the SX variant to better reflect its hardware and firmware
 
Hardware
 Core
 - Fixed 8087 FPU inaccuracy causing diagnostic test failures

 Display
 - Improved emulation performance of ATI Mach64 and S3 ViRGE cards
 - Added miroCRYSTAL 3D (S3 ViRGE) PCI video card
 - Fixed hard reset crashes with more video cards
 - Fixed Voodoo Banshee/3 crashing the emulator with banshee_do_screen_to_screen_blt: unknown srcFormat message on more full motion video applications
 - Fixed rendering issues with some drivers on S3 ViRGE and Trident TGUI cards
 - Fixed Diamond Stealth VRAM (S3 86C911) slowing emulation performance
 - Fixed hangs or display corruption with S3 cards on soft reboot
 - Fixed Compaq EGA display corruption in high resolution mode
 - Fixed Compaq EGA compatibility with non-Compaq machines
 - Fixed VGA color accuracy issue with some DOS games
 - Changed Diamond Stealth 3D 4000 (S3 ViRGE/GX2) video BIOS to a newer version
 
 Input
 - Added more model options to the 3M MicroTouch
 - Added crosshair cursor hiding option to the 3M MicroTouch
 - Fixed 3M MicroTouch not working with some drivers
 - Fixed keyboard controller inaccuracy causing keyboard lock-ups with some DOS applications
 - Fixed serial mouse crashing the emulator if attached to a non-existent serial port

 Sound
 - Fixed Aztech Sound Galaxy Pro 16 AB not working with some drivers
 - Fixed IBM PCjr / Tandy 1000 / TNDY sound issues with some games
 - Fixed MPU-401 playback issues with some games, particularly in intelligent mode
 - Renamed SB MIDI input option on Sound Blaster cards to DSP MIDI

 Network
 - Fixed modem crashing the emulator with Assertion failed! message under heavy Telnet traffic
 - Fixed modem autodetection taking too long on Windows 9x
 - Fixed modem SLIP not being reachable on some Windows configurations
 - Fixed loss of received packets on DEC and NE2000-based cards
 - Changed PLIP to require SLiRP mode like the modem
 
 Storage
 - Added generic AMD 53C974 card based on the PCscsi controller
 - Fixed dynamic VHD corruption with MFM/RLL controllers in specific cases
 - Fixed hanging issues with the Pro Audio Spectrum 16 SCSI controller
 - Fixed Tekram DC-390 not working with some drivers
 - Fixed WD MFM/RLL controllers not booting from hard disk when set to IRQ
 

Обновился эмулятор Game Boy / Color - BGB.

- Fixed many bugs and problems
- Accuracy improvements
- Emulating GDMA conflict and improved inaccessible VRAM break for this
- Speed optimizations
- GBC reality colors: cyan was a bit too dark
- Recovery save state can now also be saved if another ROM is loaded or BGB is closed