| Приставки > 6 поколение |
| GameCube NTSC Xeno gc |
| (1/1) |
| zar80kr:
Всех приветствую, прошу откликнуться и обьяснить сей вопрос ибо сам с таким не сталкивался до этого! есть GameCube NTSC америка, чип Xeno gc PAL игры играют в Черно-белом цвете есть ли какая примудрость для запуска их в цвете? пс: или ткнуть носом где почитать, если такое есть! |
| SAMael:
Гуглим инфу: Settings General Info You can adjust a few settings by holding various buttons on controller 1 while booting a game - this means from just before and during the black screen as the boot up menu goes away and the game starts up. The settings will be in effect per boot and not change behaviour permanently. [L button] Disable audiofix If you modified your backup images to work with bioses that didn't support streaming audio correctly, you can disable the native fix. [R button] Disable DREfix Turns off the native read adjustment/retries. Can be useful if you want to scan a disc for read errors. The chip will not try to prevent any errors and use the default read settings [X/Y button] Force NTSC/PAL display mode Will force the selected region's display mode regardless of the actual game region. This will work for some games, for others it won't. [START button] Version display On a version 1.0 XenoGC it shows some basic version info (Chip, GC and drive) On a version 2.0 XenoGC it shows the XenoShell which only runs in PAL50 (bug?) and is only useful for running MultiGame discs (not multi-disc games). Status LEDs The XenoGC features two status LEDs to indicate correct function. The red LED is active when the drive resets and the chip is doing its job. Once the drive has been patched successfully, the green (or orange on XenoGC2.0 and clones) LED will light up. Check your install if you only get the red LED, or it doesn't light up at all. |
| zar80kr:
SAMael спасибо, мне почему то гугл эту инфу не выдал, может искал не так! но СПАСИБО, кнопка Y помогла!!! все в цвете! |
| SAMael:
Незачто, сам юзаю. |
| Навигация |
| Главная страница сообщений |