| Другое > Hard'n'Soft |
| Проблемы с приводом DVD-RW |
| (1/1) |
| StormReaver:
Внезапно DVD-RW после нескольких лет успешного использования и тысячи записанных дисков перестал записывать, выдавая (в Nero) ошибку "привод недоступен" на 1%, запарывая тем самым болванки, если предварительно не был включен режим симуляции. Ок, допустим, спустя такое количество времени привод мог выйти из строя - подумал я и пошел за новым приводом, благо они, в отличие от видеокарт и винчестеров, в цене не растут. Купил - а он такую же ошибку выдает, вдобавок еще и завешивая Nero. Получается, что наверняка проблема была не в самих приводах, учитывая то, что я их ввиду отсутствия свободных шлейфов подключал нестандартным способом (через IDE & S-ATA USB 2.0 переходник). А может и в регистре что-то подправить надо. Так или иначе, прикрепляю к сообщению два Nero-лога - от старого IDE-шного Pioneer'овского привода и нового SATAшного Samsung'овского. Может кто сможет помочь, а то ситуация изрядно нервирует уже долгое время. Update. На случай, если влом логи качать: Windows XP 5.1 IA32 WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10.09.1999 12:06:00 ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32 NT-SPTI used Nero Version: 7.0.0.0 Recorder: <TSSTcorp CDDVDW SH-224DB>Version: SB01 - HA 1 TA 4 - 7.0.0.0 Adapter driver: <IDE> HA 1 Drive buffer : 768kB Bus Type : via Inquiry data (1) -> ATAPI, detected: ? Connected to MMC as unknown drive with class-nr : 1 Drive is autodetected - recorder class: CD-ROM: <LGH F0HAB8D >Version: 1.03 - HA 1 TA 2 - 7.0.0.0 Adapter driver: <IDE> HA 1 === Scsi-Device-Map === DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On DiskPeripheral : SAMSUNG SP1203N atapi Port 0 ID 1 DMA: On DiskPeripheral : WDC WD10EADS-00M2B0 atapi Port 1 ID 0 DMA: On DiskPeripheral : ST2000VM003-1ET164 atapi Port 1 ID 1 DMA: On CdRomPeripheral : ASUS DVD-E616A3T atapi Port 2 ID 0 DMA: On OtherPeripheral : __RAID___DUMMYDEVICE________ vdrv1000 Port 4 ID 0 DMA: Off CdRomPeripheral : VXDV BD-HD-DVDROM S1010.0 vdrv1000 Port 4 ID 1 DMA: Off CdRomPeripheral : LGH F0HAB8D 1.03 a0f4p2jo Port 5 ID 0 DMA: Off CdRomPeripheral : IBEB S96RO5EB0D 3.5Z ae3ns6jc Port 6 ID 0 DMA: Off CdRomPeripheral : SI (KOR)DVD-ROM CRD-510B1.00 cdspacex Port 7 ID 0 DMA: Off === CDRom-Device-Map === LGH F0HAB8D I: CDRom2 TSSTcorp CDDVDW SH-224DB J: CDRom4 IBEB S96RO5EB0D K: CDRom3 SI (KOR) DVD-ROM CRD-510B M: CDRom5 ASUS DVD-E616A3T N: CDRom0 VXDV BD-HD-DVDROM S10 O: CDRom1 ======================= AutoRun : 1 Excluded drive IDs: WriteBufferSize: 83886080 (0) Byte ShowDrvBufStat : 0 BUFE : 0 Physical memory : 2047MB (2097151kB) Free physical memory: 199MB (204704kB) Memory in use : 94 % Uncached PFiles: 0x0 Use Inquiry : 1 Global Bus Type: default (0) Check supported media : Disabled (0) 16.12.2014 ﾏ裲・UDF 16:30:11 #1 Text 0 File Isodoc.cpp, Line 6410 UDF document burn settings ------------------------------------------ Determine maximum speed : FALSE Simulate : TRUE Write : TRUE Finalize CD : TRUE Multisession : FALSE Burning mode : DAO Mode : 1 UDF Mode : pure UDF Revision : 1.02 UDF Partition Type : physical 16:30:11 #2 Text 0 File ThreadedTransfer.cpp, Line 525 ReadBuffer-Pipe got 81920KB of Memory 16:30:11 #3 Text 0 File Reader.cpp, Line 124 Reader running 16:30:11 #4 Text 0 File Writer.cpp, Line 113 Writer J: TSSTcorp CDDVDW SH-224DB running 16:30:11 #5 Text 0 File Burncd.cpp, Line 3301 Turn on Disc-At-Once, using DVD media 16:30:11 #6 Text 0 File DlgWaitCD.cpp, Line 277 Last possible write address on media: 2298495 (510:46.45, 4489MB) Last address to be written: 2277279 (506:03.54, 4447MB) 16:30:11 #7 Text 0 File DlgWaitCD.cpp, Line 289 Write in overburning mode: NO (enabled: CD) 16:30:11 #8 Text 0 File DlgWaitCD.cpp, Line 2568 Recorder: TSSTcorp CDDVDW SH-224DB, Media type: DVD-R Disc Manufacturer: CMC MA - G. AM3 Disc Application Code: 64, Disc Physical Code: 193 16:30:11 #9 Text 0 File DlgWaitCD.cpp, Line 456 >>> Protocol of DlgWaitCD activities: <<< ========================================= 16:30:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 846 Setup items (after recorder preparation) 0: TRM_DATA_MODE1 () 2 indices, index0 (150) not provided original disc pos #0 + 2277280 (2277280) = #2277280/506:3.55 relocatable, disc pos for caching/writing not required/ required, no patch infos -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2277280 blocks [J: TSSTcorp CDDVDW SH-224DB] -------------------------------------------------------------- 16:30:11 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1058 Prepare recorder [J: TSSTcorp CDDVDW SH-224DB] for write in CUE-sheet-DAO DAO infos: ========== MCN: "" TOCType: 0x00; Session Closed, disc fixated Tracks 1 to 1: 1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4663869440, ISRC "" DAO layout: =========== __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________ 0 | lead-in | 0 | 0x41 | 0x00 0 | 1 | 0 | 0x41 | 0x00 0 | 1 | 1 | 0x41 | 0x00 2277280 | lead-out | 1 | 0x41 | 0x00 16:30:11 #12 Text 0 File SCSIPassThrough.cpp, Line 34 SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME 16:30:11 #13 Phase 24 File dlgbrnst.cpp, Line 1724 Caching of files started 16:30:11 #14 Text 0 File Burncd.cpp, Line 4129 Cache writing successful. 16:30:11 #15 Phase 25 File dlgbrnst.cpp, Line 1724 Caching of files completed 16:30:11 #16 Phase 32 File dlgbrnst.cpp, Line 1724 Simulation started at 6x (8310 ﾊ・・ 16:30:11 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2669 Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0 16:30:11 #18 Text 0 File DVDR.cpp, Line 2469 Recording mode: Sequential Recording Mode 16:30:11 #19 Text 0 File MMC.cpp, Line 21541 Set BUFE: Super Link -> ON 16:30:11 #20 Text 0 File DVDR.cpp, Line 2624 Start write address at LBA 0 DVD high compatibility mode: Yes 16:30:11 #21 Text 0 File Cdrdrv.cpp, Line 8385 ---- DVD Structure: Physical Format Information (00h) ---- Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050 Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33) Disc Size: 120 mm, Maximum Rate: <not specified> (F h) Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable Linear Density: 0,267 um/bit, Track Density: 0,74 um/track Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW) End Physical Sector Number of Data Area: 0 h End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB) Data in Burst Cutting Area (BCA) does not exist Start sector number of the current Border-Out: 0 h Start sector number of the next Border-In: 0 h Media Specific [16..63]: 00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!.... 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................ 16:30:14 #22 Text 0 File Cdrdrv.cpp, Line 1195 16:30:14.515 - J: TSSTcorp CDDVDW SH-224DB : Queue again later 16:30:14 #23 SPTI -600 File SCSIPassThrough.cpp, Line 306 CdRom4: SCSIStatus(x00) WinError(121) NeroError(-600) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x2A 00 00 00 00 40 00 00 20 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x0aab0000: Len x10000 0x09 00 02 00 6C 00 01 00 E4 C6 76 00 40 00 00 00 0xB4 10 DE 07 0C 10 10 1E 0B 00 00 00 01 00 00 00 0x00 00 00 00 00 00 00 00 26 00 00 00 00 00 00 00 16:30:14 #24 CDR -600 File Writer.cpp, Line 302 Device not available J: TSSTcorp CDDVDW SH-224DB 16:30:14 #25 Text 0 File ThreadedTransfer.cpp, Line 228 all writers idle, stopping conversion 16:30:15 #26 Text 0 File ThreadedTransfer.cpp, Line 222 conversion idle, stopping reader 16:30:15 #27 Text 0 File DVDR.cpp, Line 2866 EndDAO: Last written address was 63 16:36:42 #28 SPTI -600 File SCSIPassThrough.cpp, Line 306 CdRom4: SCSIStatus(x00) WinError(121) NeroError(-600) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x5A 00 05 00 00 00 00 00 48 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Buffer x03c15a00: Len x48 16:36:43 #29 CDR -600 File WriterStatus.cpp, Line 167 Device not available J: TSSTcorp CDDVDW SH-224DB 16:36:43 #30 TRANSFER -24 File WriterStatus.cpp, Line 167 Could not perform end of Disc-at-once 16:37:48 #31 Phase 34 File dlgbrnst.cpp, Line 1724 Simulation failed at 6x (8310 ﾊ・・ 16:38:21 #32 SPTI -600 File SCSIPassThrough.cpp, Line 306 CdRom4: SCSIStatus(x00) WinError(121) NeroError(-600) Sense Key: 0x00 (KEY_NO_SENSE) Sense Code: 0x00 Sense Qual: 0x00 CDB Data: 0x1E 00 00 00 00 00 00 00 00 00 00 00 Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00 Existing drivers: File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=9464 bytes, created 08.03.2007 2:51:00 File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10.09.1999 12:06:00 File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 05.10.2004 23:00:00 File 'Drivers\PXHELP20.SYS': Ver=3.00.93.0, size=45648 bytes, created 04.03.2011 22:44:14 (Prassi/Veritas driver for win 2K) Registry Keys: HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option) |
| Dyons:
какой эмулятор привода в системе стоит? |
| StormReaver:
Daemon Tools Lite, Alcohol 120% и VirtualCD v.10 Все три стоят далеко не первый год и физическим приводам никак не мешали. |
| Колючий:
Я бы сначала переходник проверил. Сколько уже глюков от подобных наловился. Попробовал бы отключить на время один из винчестеров, да воткнуть привод нормально, проверить. |
| Навигация |
| Главная страница сообщений |