На сайт добавлены новые записи прохождений:

Game Boy

• Lucky Luke (U) (M4) [C]

• TMNT (U) [Rus]
• Baldur's Gate - Dark Alliance (E) [Rus]

• Faxanadu (U) [Rus]

• Ushio to Tora (J)

• Sengoku Denshou (J)

- Apple2: Fixed erroneous parsing of WOZ file padding bytes and unknown chunks' data as 8-byte chunk headers. Fixed broken handling of the end-of-stream condition when reading from non-compressed files stored in ZIP archives; fixes loading of such Apple II WOZ disk images and CloneCD CD images - SS: Implemented workaround for gcc bug #113255 in the VDP1 rasterization code - Apple2: Fixed typos/brainfart that broke language card and ROM card control accesses via $C08F

New Display Manager Framework - New graphics backend abstraction layer will eventually allow frontends built for other graphics backends such as SDL - New scaling modes: Choose from Fixed, Integer, Fit and Stretch scaling options - Display Apertures: Choose how much of the emulated display field you wish to see: - No overscan - 'Monitor-accurate' overscan - Full overscan - Full display field including hblank and vblank periods (for debugging) - Hardware aspect correction: Aspect correction is now performed in the shader for reduced CPU load - Multi-window support: Define additional output windows in the configuration file - Multiple windows can display the same video card, with different display options - Windows can be set to a fixed size or scale factor, or made completely resizable - Windows can be pinned 'always on top' - Windows can be toggled full-screen via CONTROL-ALT-ENTER hotkey - Shader support: A basic CRT shader is built into the new display scaler - Internal shader features: - Barrel distortion - Corner radius (rounded corners) - Monochrome phosphor simulation - Scanline emulation synchronized to emulated video resolution - Presets for the internal scaler can be defined in configuration and applied to different windows New ROM Definition Framework - ROM set definitions are no longer hardcoded. They will be read from ROM set definition TOML files in the ROM directory - Add your own custom ROM sets or contribute missing ROM definitions to MartyPC New Machine Configuration Framework - Define multiple Machine hardware configurations, name them, select them in the main config or via command line argument - Configure the amount of conventional memory, the number and type of floppy drives, video cards, serial ports and more New Resource Manager Framework - Paths are to 'resource ids' are now fully configurable, and facilities to build file trees are provided. MartyPC can create needed directories on startup. The Floppy and VHD browsers have been rewritten to take advantage of this new system, and so now you can organize your media directories into subdirectories for convenience EGA Video Card - EGA is back! A character-clocked EGA implementation is here, although it may still be a bit rough around the edges. EGA will continue to be polished in upcoming releases - Features: - Functional emulation of each of the 5 LSI chips on the EGA - Per-scanline Pel panning - effects like the wibble in Beverly Hills Cop work - Line compare register - See the status bar in Catacombs 3d - CGA compatibility mode - Play Alleycat - Software fonts - change your DOS font, or see a graphical mouse cursor in text mode (Norton Utilities 6.0) - Known issues: - Visual glitches with n0p's Windows 3.0 EGA driver patched for 8088 - Some more obscure registers not properly emulated / investigated (SOM, etc.) - Aperture definitions / adjustments not final - Implementation may be slow in parts - more optimization needed (SIMD?) MDA Video Card - Not quite as a flashy as EGA, but the MDA card type is now also supported, and moreover, you can install an MDA alongside a CGA or EGA card for a dual head display - 9th column rendering and underline attributes supported - Includes the framework for a LPT port, which will now be detected - Known issues: - Needs optimization - due to the 9-dot character clock making 64-bit aligned writes impossible, MDA is currently slower to emulate than EGA New Keyboard System - MartyPC now performs low-level emulation of a Model F keyboard instead of directly translating OS input events to the core - Model M emulation to come - Configurable typematic rate and delay - International keyboard layouts are now supported via translation files - Translation files support all keycode names defined by w3c - Translation files can define direct scancode mappings or full macros - Initial translation files include US, UK and IT layouts. More to come. Help appreciated - Configurable hotkey support Debugger/GUI Improvements - Reorganized Debug menu - Improved appearance of CPU State display - Instruction Trace: In Csv trace mode, instruction trace now has a scrolling table with optional columns - Memory Viewer: Fixed scrolling issues, disassembly popup now uses fixed-width font - IVT Viewer: Fixed scrolling, IVT entries now animate on change, added annotations - Instruction History - fields now align with Disassembly View, and cycle counts have been moved to the right - Memory Viewer will now show values for memory mapped regions - Improved VHD creator - should no longer be confusing to use - Text Mode Viewer - View ASCII contents of video memory, which you can select and copy to clipboard - New themes courtesy of egui-themer crate - New notification system courtesy of egui-notify crate - Implemented success/error notifications for disk and file operations, screenshots, etc Frontend Bug Fixes / Improvements - Implemented configurable CPU halt behaviors - Re-added CTRL-ALT-DEL menu option - New benchmark mode (enable in martypc.toml, or use --benchmark-mode) - Floppy and HDD browsers now support subdirectories - Write protection can be toggled for floppy drives with configurable default - Sound initialization is now optional - Added 8088 JSON CPU test generator and validator - Used to create the first comprehensive test suite for the Intel 8088 - Added debug_keyboard config flag - this will print keyboard event info to the console for support Core Bug Fixes / Improvements - CPU: Refactored general registers to union types (not any faster, but code is somewhat cleaner) - CPU: Refactor PC from u32 to u16 to address segment wrapping issues, implement ip() in terms of PC - CPU: Instruction counts properly increment even when instruction history is off - CPU: Fixed device ticks after interrupts - CPU: Improved Halt/Resume logic and cycle timings - CPU: New sigrok cycle log format for viewing cycle logs in sigrok PulseView logic analyzer - CPU: Updated disassembler to normalize output against iced-x86. Now resolves negative immediates and displacements - CPU: Fixed typo for 'bp+di+DISP' in both disassemblers - CPU: Brand new, simplified BIU state logic - CPU: Fixed & Improved DMA refresh scheduling - CPU: Fixed issue where Call Stack could grow uncontrollably with recursive code or interrupts - CPU: Fixed CS:IP reporting in Instruction trace mode logs - CPU: Fixed memory leak in Instruction trace mode - CPU: Fixed CPU cycle timings for LES and LDS instructions - CPU: Fixed CPU issue where incorrect microcode jump was listed for fixed word displacements - CPU: Fixed CPU issue where a prefetch abort would not properly override a prefetch delay - PIC: Revised edge-triggered mode to lower INTR if last unmasked IR line goes low - PIC: Ignore IMR during INTA pulse - PIC: Handle multiple IRR bits being unmasked at the same time - PIC: Honor IRQ offset specified in IWC2 to PIC - PIT: Simulate counter write latency. A delay tick will be inserted if a write occurs too close to falling edge of clock - PIT: Revised count register loading logic. Counting element uses internal reload value - CGA: Properly model CRTC last-line flag when hcc < 2 - CGA: Preliminary CGA snow emulation. Not yet 100% accurate - CGA: Properly disable cursor if cursor start > maximum scanline - CGA: Reverted color palette entry for black from dark gray to true black - CGA: Fully reset the CGA device on reboot. May(?) fix issue with black screens in 8088MPH - CGA: Don't recalculate composite parameters if mode change was enable bit only - Xebec HDC: Proceed from Reset state to WaitngForCommand after a delay - Xebec HDC: Implemented missing Read Sector Buffer command

- UI: implement an option to pause the emulator when the window is inactive - UI: improve lack of response to input changes in the sprite viewer when the emulator is paused - UI: replace QOpenGLWidget with QWidget - UI: fix solar sensor level menu that has been broken in 1.8.0 - GPIO: fix broken deserialization of port directions - APU: MP2K HLE: handle corrupted wave info addresses - APU: PSG L/R volume must be remapped from 0-7 to 1-8 - GameDB: Japanese Boktai releases have a solar sensor - Redirect stdout on Windows

General: - Fixed GLSL version parsing on some OpenGL ES2 platforms - Don't try to use shaders on old OpenGL implementations AGI: - Fixed Space Quest 1 version 1.0X freezing in the skimmer - Fixed Mixed-Up Mother Goose message boxes during nursery rhymes - Fixed Mixed-Up Mother Goose graphics in Amiga version - Fixed Gold Rush clock time at Fast and Fastest speeds - Fixed Atari ST version of Manhunter 1 not starting - Fixed Tandy CoCo3 version of Leisure Suit Larry 1 not starting - Fixed Tandy CoCo3 unofficial ports not starting - Fixed Amiga menus in Space Quest 1, Manhunter 1, and Manhunter 2 - Fixed Graham facing away from the king in King's Quest 1 - Fixed Alexander getting stuck on the stairs in King's Quest 3 - Fixed Larry being able to shoplift in Leisure Suit Larry 1 - Fixed ducks not jumping at the start of Donald Duck's Playground - Fixed instant death in fan game "Phil's Quest: The Search for Tolbaga" - Fixed buttons freezing in fan game "DG: The AGIMouse Adventure" - Fixed unrecognized words in fan game "V - The Graphical Adventure" - Added detection for Macintosh version of Mixed-Up Mother Goose AGS: - Updated detection tables - Simplified character import from Sierra games for QfG2 AGDI - Fixed graphical glitch affecting Unavowed and Heroine's Quest - Fixed partial outlines for some letters in Kathy Rain - Fixed crash in Alum - Added stub to prevent crash at the beginning of Falcon City Broken Sword 2: - Fixed crash when quitting the game while it was paused MM: - Enabled engine, allowing MM1 and Xeen to be compiled - Added MT32/LAPC-1 support for Xeen engine - Fixed Xeen regression which caused some sound effects to stop abruptly mTropolis: - Fixed crash in Muppet Treasure Island on some platforms - Fixed jewel puzzle in Muppet Treasure Island not being randomized NANCY: - Fixed the telephone hints in Secrets Can Kill - Fixed the crashing and drawing issues on ARM machines when playing Message in a Haunted Mansion's maze minigame - Fixed the 'M' keyboard key not working in Message in a Haunted Mansion - Allowed general keymaps to be shown in the engine Keymaps menu - Virtual keyboard now correctly triggers on/off wherever text input is needed SCUMM: - Fix screen corruption (and sometimes even crashes) in Mac Loom and Indiana Jones and the Last Crusade, most noticeably when using menu shortcut keys - Fix enabling/disabling of Open and Save in Mac Indiana Jones and the Last Crusade TWINE: - Fix ladder climbing regression - Fix scenery zoom issue - Fix animation glitches after using the holomap Ultima: - Fix Ultima VIII hidden minimap blocking keyring use - Fix Ultima VIII page breaks in books - Fix Ultima VIII text centering for plaques - Fix Ultima VIII crash on dragging items to screen edge - Fix Ultima VIII unexpected jumping on left click - Fix Ultima VIII camera during cutscenes for Shrine of the Ancient Ones - Fix Ultima VIII invalid placement of items within containers - Fix Ultima VIII never-ending lava sounds V-Cruise: - Fixed crash in Reah: Face the Unknown and Schizm: Mysterious Journey when music is muted Android port: - Fixed crash in built-in help with German language Atari port: - Fixed crash when exiting ScummVM - Fixed BBVS (and possibly others) gameplay by using more precise math model macOS port: - Fixed a problem where some Mac games would not load resources correctly - Updated application icon to conform with modern standards

User interface - Fixed exit confirmation incorrectly disabled by ACPI shutdowns - Fixed missing translations on some error messages related to hard disk images - Updated translations: Chinese (Simplified), Chinese (Taiwan), Japanese, Korean Machines - Added IBM Aptiva 510/710/Vision Socket 3 machine - Added NEC Mate NX MA23C Socket 7 machine - Added PC Chips M747 Slot 1 machine - Added AGP support to the MSI MS-5172 - Fixed BIOS error caused by serial passthrough on the IBM PS/2 Model 70 - Fixed Gigabyte GA-5SG100 filed on the wrong category (now Super Socket 7) - Changed maximum CPU speed on the Hyundai SUPER-16T to 8 MHz Hardware Core - Fixed operating system crashes related to the LOCK instruction on 386 CPUs only Display - Added Trident TVGA 8900D-R ISA video card (faster 8900D) - Added more BIOS options to the Tseng ET4000AX ISA video card - Fixed Voodoo 3D glitches in several games, especially on 64-bit builds - Fixed 1600x1200 resolution availability through DDC data on older operating systems - Fixed Tseng ET4000AX and ET4000/W32 rendering issues with specific resolutions - Fixed several rendering issues on S3 86C801 and 86C805 cards - Fixed Linux cursor issues on Matrox cards - Fixed specific video playback acceleration glitches on S3 ViRGE cards - Changed maximum video memory on the STB PowerGraph 64 Video to 2 MB to match real cards Sound - Improved OPL2 and OPL3 sound quality - Fixed base Sound Blaster AWE64 incorrectly identifying as a Value Storage - Added McIDE IDE disk controller for MCA machines - Added Vision Systems LBA Enhancer add-on ROM - Added German and newer English BIOS options to the Adaptec AHA-154xCP SCSI controller - Fixed instability issues with ESDI disk controllers, particularly MCA ones - Fixed floppy drive controller inaccuracy crashing 386BSD and FlexOS 286 Other - Added Everex Magi Magic EV-165A ISA memory expansion card